Exchange Magazines Or Cartridges In A Partition - Spectra Logic Spectra T950V User Manual

Tape library
Hide thumbs Also See for Spectra T950V:
Table of Contents

Advertisement

Chapter 7 — Importing and Exporting Cartridges
4. Click the appropriate Export/Exchange button to select the location 
For a...
Storage partition
Cleaning partition
5. Remove the magazine from the open TAP and set it aside.
6. Return to the operator panel and select the appropriate option on the 
Select...
Continue
Stop Exporting

Exchange Magazines or Cartridges in a Partition

The process for exchanging a magazine or cartridges in a partition is the 
same as that for exporting a magazine up to the point where the magazine 
is delivered to the TAP.
1. Complete Step 1 on page 213 through Step 4 on page 214 to begin the 
August 2019
from which you want to export or exchange magazines.
Note:
If there are no full chambers in the selected location, the Export/
Exchange button is not present. 
Select Export/Exchange for....
Storage: Full Chambers
Entry/Exit: Full Chambers
Entry/Exit: Populated
Chambers
Cleaning: Full Chambers
The library retrieves a magazine from the specified pool and places it in 
the TAP. The TAP door opens and a Feedback Required screen displays.
Feedback Required screen.
Note:
If you wait more than 10 minutes to respond, the library times 
out and displays a message on the operator panel. The TAP door 
is left open. 
If...
You want to export another magazine. The process continues as follows:
1. The TAP door closes automatically when you click Continue. The library 
retrieves the next magazine and delivers it to the TAP. 
2. The export process continues as long as there are magazines in the selected 
location or until you click Stop Exporting on the Feedback Required screen. 
Continue to remove the magazines and click Continue after each one. When 
all of the magazines in the selected location are exported, the process stops 
automatically and the Import/Export TeraPack Magazines screen displays.
The magazine you removed from the TAP is the last one you want to export.
Note:
If you want to exchange only the expired cleaning cartridges in a 
cleaning partition, skip to Export or Exchange Expired Cleaning 
Cartridges on page 215.
exchange process.
Exporting or Exchanging Magazines and Cartridges
If you want to export or exchange...
All of the magazines in the storage pool.
All of the magazines in the entry/exit pool.
Only the magazines in the entry/exit pool that 
contain one or more cartridges.
All of the magazines in the cleaning partition.
User Guide—Spectra T950V Library
214

Advertisement

Table of Contents
loading

Table of Contents