Spectra Logic Spectra T950V User Manual page 439

Chapter 15 — Maintaining the Drives
3. Select the partition containing the drives you want to update from the
4. Select the drives that you want to update.
If you have multiple drive generations in the same partition, make sure that you
Important
only select one generation at a time. Each drive generation uses different firmware.
5. Click Next. The Drive Firmware Update Tape Selection screen displays
If you have firmware update tapes for multiple drive generations in the same
Important
magazine, make sure that you select the firmware update tapes that correspond to
the generation of the drives you selected in
August 2019
drop‐down list, then click Go. The Drive Firmware Update screen
refreshes to show the drives assigned to the selected partition.
Figure 252 Select the partition for the drives you want to
update.
with a list of the cartridges currently in the entry/exit pool for this
partition. Select the firmware tapes you want to use for the update.
Figure 253 Select the firmware tapes you want to use for the
update.
Updating Drive Firmware
Step 4 on page 439 or the update fails.
User Guide—Spectra T950V Library
439