Chapter 12 — Library Troubleshooting
5. Decrease the number of storage chambers assigned to the partition by
6. Click Next to advance through the remainder of the screens without
7. Click Save. The Share Library Services screen redisplays.
8. Repeat Step 2 on page 347 through Step 6, this time increasing the
If the library has multiple partitions and you imported magazines into all of the
Important
partitions after the configuration backup file you used to restore the library was
generated, the magazines can potentially end up in the wrong partition. Carefully
examine the cartridge inventory for each partition. Export any wrongly assigned
magazines and reimport them into the correct partition.
9. Review the information on the screen and confirm that all settings are
10. Click Save. The library requires several minutes to store the
Restore the Library Configuration Using a Saved Configuration
Use the following steps if you want to restore the library from a
configuration backup file that was generated manually, as described in Use
Manual Backup of the Library Configuration on page 137.
1. Log into the library as a user with superuser or administrator
August 2019
the number of missing magazines.
making any additional changes until you reach the Save Library
Configuration screen.
number of storage chambers assigned to the partition to the original
number. The magazines in the free pool are reassigned to the partition.
correct for this partition's configuration.
If the configuration information is correct, proceed to Step 10.
If the configuration information is not correct:
Click Cancel and configure the partition again from the
beginning.
— O R —
Click Previous to move backward through the configuration
screens until you reach the settings that need correction. Make
any necessary corrections, then click Next to move forward
through the screens and return to the Save Partition screen.
configuration information, after which the Shared Library Services
screen redisplays.
Note:
The manually‐generated configuration backup files do not
include the MLM and DLM databases. If you also need to restore
the MLM and DLM databases, you must use a separately
generated backup of the MLM database (see Restore the MLM
and DLM Databases on page 350).
privileges.
Restoring the Library Configuration
User Guide—Spectra T950V Library
348