Spectra Logic Spectra T950V User Manual page 399

Chapter 14 — Maintaining the Library
6. The Select Library Package screen displays, listing the file names for the
7. Select the appropriate BlueScale package.
Source
Spectra Logic
Memory Card
August 2019
available BlueScale packages.
Note: The file names begin with the BlueScale version number,
followed by the date of release in YYYYMMDD format.
Figure 224 Select the BlueScale package.
 If the Package does NOT display in the USB or Package
Notes:
server section, you may have downloaded the package for
the wrong library type or the wrong signed/unsigned
package type.
 BlueScale packages may be found on the sources described in
the table below.
Description
Select and download the desired BlueScale package from Spectra Logic's
package server to the memory card in the LCM and then install it.
Notes:
 The library must have a connection to the Internet before you can use this
option (see Configure Network Settings on page 105).
 If directed to do so by Spectra Logic Technical Support, update the IP address
and package directory for the Spectra Logic package server (see Configure a
Package Server on page 130).
Select the desired BlueScale package from packages already stored on the
memory card in the LCM.
Updating the BlueScale Software and Library Firmware
User Guide—Spectra T950V Library
399