Chapter 4 — Configuring the Library
For this field...
SMTP IP Address
Receive
5. Click Save. The screen refreshes to show the new or updated mail
6. If desired, select Send Test next to the newly added mail recipient to
7. Repeat Step 2 on page 108 through Step 6 on this page to configure or
8. Click Previous to return to the System Setup screen.
Enable Email for the Auto Configuration Save File
Overview Having a current backup of the library's metadata (the library
partition configuration, the MLM and DLM databases, and any BlueScale
encryption keys) is an essential component of any disaster recovery plan.
For more information about protecting the library metadata, see Back Up
and Protect the Library Metadata on page 458.
In the event that you need to restore the library configuration, you can use
either the automatically saved configuration backup file from the LCM or
the emailed copy (see Restore From an Auto Configuration Save File on
page 344).
August 2019
Do the following...
Enter the IPv4 or IPv6 address of your SMTP server in the SMTP IP Address
field.
Select the type(s) of messages that the user receives by selecting one or more of
the message types listed.
Fatal — A n error occurred that prevents the library from continuing operation.
Immediate attention is required.
Error — A n error occurred that impacts the operation of the library. Determine
the cause of the error and remedy it as soon as possible.
Warning — T he library detected conditions that may impact operation.
Determine the cause of the problem and remedy it as soon as possible.
Informational — A ctivities that generate system messages occurred.
Notes:
Selecting a message type automatically sends all messages of that type to the
recipient as they are generated by the library.
If no message type is selected, the library does not automatically send
messages to the recipient. However, messages can still be sent to the recipient
on an individual basis when traces or diagnostics are run.
Do not select message types for the autosupport@spectralogic.com mail
recipient. This mail recipient is only used to receive AutoSupport ticket
requests or ASL and HHM files that are generated by the library.
recipient in the Recipients portion of the Mail Recipient screen
(Figure 46 on page 108).
send a test email.
modify additional email recipients.
Configuring the Global System Settings
User Guide—Spectra T950V Library
109