Spectra Logic Spectra T950V User Manual page 181

Chapter 6 — Configuring and Managing Partitions
Use the following steps to configure the PreScan and PostScan features
used in the partition.
1. From the Chambers and Drives screen, click Next. The MLM Media
2. Enable and configure the PreScan and PostScan options for the
August 2019
Verification screen displays.
Note: If you do not want to use the PreScan and PostScan features,
click Next again and skip to Select the Encryption Mode on
page 183.
Figure 91 The Media Verification screen.
partition.
 Selecting any of the PostScan triggers automatically enables
Notes:
the selected PostScan option for the partition.
 If you enable PostScan, the options for SKLM or KMIP
Encryption are not available when you get to the Encryption
screen.
 The automatic PostScan operation configured on this screen
only verifies MLM‐enabled cartridges. If your partition uses
cartridges that are not MLM‐enabled, you must add them to
the PostScan queue manually (see Request a Manual
PostScan on page 272).
Creating a Storage Partition
User Guide—Spectra T950 Library
181