Reset The Lcm Or Rcm - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 12 — Library Troubleshooting

Reset the LCM or RCM

To reset the LCM or RCM, insert the tip of a toothpick or other similar non‐

conductive object into the hole on the back of the LCM or RCM to press the

reset button.

Do not use a metallic object to press the reset button. You may inadvertently cause

an electrical short inside the module.

Resetting the RCM resets the motion control for the robotics. Any move requests

fail until the RCM completes its initialization.

Resetting the LCM resets the operator panel and the web server. Any connections

to the library through the BlueScale web interface are lost. Wait five minutes for the

reset to complete and then reconnect. Backup operations are not affected.

Figure 186 The reset button on the Spectra LS.

User Guide—Spectra T950V Library

Resetting Components