Spectra Logic Spectra T950V User Manual page 409

Chapter 14 — Maintaining the Library
5. Click Finish to complete the update. Updates do not take effect until the
Always click Finish to complete the BlueScale update process. Do not manually
Important
reboot the LCM, power-cycle the library, or perform any other operations on the
library when you see the Package Results screen. Doing so may cause the update
process to fail.
6. When the update completes, the library automatically sends an email to
7. After the update completes, use your storage management software to
Troubleshooting
If you encounter problems while performing a package update, examine
any system messages and the package update log to determine the cause of
the failure. Resolve the problems and retry the update.
LCM does not automatically reboot If the update package includes
updates to software running on the LCM (LC server, WebServer, etc.) or
RCM the LCM reboots when you click Finish. Wait at least five minutes for
the LCM to complete its initialization. If the LCM does not reboot correctly,
reseat the LCM and perform the Package Update process again.
Component failed to update Click Finish to complete the update. When
the LCM resets, reseat the component that failed to update, and perform
the Package Update process again. If the component fails to update a
second time, contact Spectra Logic Technical Support. See Contacting
Spectra Logic on page 7.
August 2019
library completes the update process.
If you are using the BlueScale web interface to perform the
Note:
update, the connection to the library is lost when the LCM
reboots. Allow sufficient time for the LCM to complete its
initialization, then enter the library's IP address in your web
browser to reconnect.
Spectra Logic Technical Support if it is configured as a mail recipient
and you selected this option in Step 12 on page 404.
restart any backup processes.
Updating the BlueScale Software and Library Firmware
User Guide—Spectra T950V Library
409