Table of Contents
Advertisement
Chapter 14 — Maintaining the Library
Library configuration is corrupted during the update process Use the
following steps to restore the library's configuration if it becomes
corrupted during the package update process.
The
Caution
immediately after a package update is performed.
Any library configuration or inventory changes made between the time that the
package update is performed and the utility is run are lost.
1. From the toolbar menu, select Maintenance > Tools. The Maintenance
2. Select Utilities. The Utilities screen displays.
3. Click Show Advanced. The Advanced Utilities Confirmation screen
4. Click Next. The Utilities screen refreshes to show a list of the advanced
5. Scroll through the list of advanced utilities and select Restore
6. Click Run Utility to restore the library to the Checkpoint library
7. After the library configuration restores, perform the Package Update
August 2019
Restore Configuration from Checkpoint
Note:
The library automatically saves a Checkpoint Configuration
Backup file prior to beginning a package update.
Tools screen displays.
displays.
utilities.
Configuration from Checkpoint. The screen refreshes to show the details
for the utility.
Figure 233 The Advanced Utilities screen.
configuration.
process again.
Updating the BlueScale Software and Library Firmware
utility should only be used
User Guide—Spectra T950V Library
410
Advertisement
Table of Contents
Troubleshooting
