Chapter 14 — Maintaining the Library
Manage Update Packages
The BlueScale packages downloaded to the library reside on the memory
card in the LCM. Over time, the packages (one per update) accumulate on
the card and the library may post an error message notifying you that the
memory card is full. You must delete downlevel packages before you can
continue; you can also choose to delete downlevel packages at other times.
Deleting a package file does not delete the BlueScale software or component
firmware already applied to the library; it simply removes the package file
from local storage on the LCM.
The following steps describe how to delete unwanted BlueScale packages
from the memory card in the LCM.
1. Log into the library as a user with superuser or administrator privileges.
2. From the toolbar menu, select Maintenance > Package Update. The
3. Click Manage Packages. The Manage Packages screen displays with a list
4. Select the package(s) that you want to delete, then click Delete Selected.
August 2019
Note:
There is no confirmation request before the selected package is
deleted. Make sure that you no longer need access to a package
file before you delete it.
Package Update screen displays (see Figure 223 on page 398).
of all the package files currently stored on the memory card in the LCM.
Figure 234 Select the BlueScale packages you want to delete.
The package delete process begins.
Updating the BlueScale Software and Library Firmware
User Guide—Spectra T950V Library
411