Configure Alarms - Spectra Logic Spectra T950V User Manual

Chapter 11 — Configuring and Using AutoSupport
8. Repeat Step 1 on page 305 through Step 6 on page 307 if you want to
9. Click Previous to return to the main AutoSupport screen.
Delete an AutoSupport Profile
Use the following steps to delete an existing profile.
1. Log into the library as a user with superuser or administrator
2. From the toolbar menu, select Maintenance > AutoSupport. The
3. Click Manage Profiles. The AutoSupport Profiles screen displays (see
4. Click Remove next to the contact you want to delete. The Remove
5. Click Remove. The AutoSupport profiles screen redisplays with the
6. Click Previous to return to the main AutoSupport screen.

Configure Alarms

Use the steps in this section if you want the library to automatically
generate an ASL file in the event that any of the critical events listed under
Critical Alarms on page 301 occurs.
1. If you did not already do so, configure one AutoSupport profile as the
August 2019
create additional profiles.
Note: When you create multiple profiles, they are listed in the order in
which they are created, not in alphanumeric order.
If one of the profiles is configured as an AutoSend recipient, the
Configure Alarms button is active (see Figure 161 on page 304).
privileges.
AutoSupport screen displays (see Figure 161 on page 304).
Figure 167 on page 307).
Profiles screen displays, asking you to confirm the deletion.
updated list of profiles.
AutoSend recipient (see Step 4 on page 306).
Configuring AutoSupport
User Guide—Spectra T950V Library
308