View Hardware Health Monitoring (Hhm) Data - Spectra Logic Spectra T950V User Manual

Chapter 12 — Library Troubleshooting

View Hardware Health Monitoring (HHM) Data

The advanced utility called HHM: View Data generates a report showing
the current status of the HHM counters. This information includes the
following:
 Library serial number and name (if configured)
 Information about key library components monitored by HHM,
 Robotics moves: Drive To Drive Moves, Drive To Slot Moves, Slot To
In addition to the HHM: View Data utility, two additional HHM utilities configure the
Caution
HHM counters and thresholds for the monitored components. Do not change the
values for any counters or thresholds unless you are specifically instructed to do so
by Spectra Logic Technical Support.
Use the following steps to view the current HHM data.
1. Log into the library as a user with superuser or administrator
2. From the toolbar menu, select Maintenance > Tools. The Maintenance
3. Select Utilities. The Utilities screen displays.
4. Click Show Advanced. The Advanced Utilities Confirmation screen
5. Click Next. The Utilities screen refreshes to show a list of the advanced
6. Scroll through the list of advanced utilities and select HHM: View Data.
August 2019
including the type of reminder generated when the component reaches
its maintenance threshold
Slot Moves, Slot To Drive Moves, TAP In Moves, and TAP Out Move.
privileges.
Tools screen displays.
displays.
utilities.
The screen refreshes to show the details for the utility.
Figure 181 The HHM: View Data utility.
Using BlueScale Hardware Health Monitoring
User Guide—Spectra T950V Library
331