Chapter 5 — Operating the Library
4. Click Go. The Storage Density screen showing the selected metrics
View Robot Utilization Information
The Robot Utilization by Hour metric lets you monitor the percentage of
each hour that the library's robotics are actively operating over the last 24
hours. The data is updated every hour while the library is powered on.
The Robot Utilization by Hour metric can include up to 24 data points,
The data is stored in volatile memory and is not retained when the
Use the following steps to view the robot utilization information.
1. Select General > General Status from the toolbar menu. The General
2. Click Robotics to display the Robotics Status screen.
August 2019
displays.
Figure 74 The Storage Density metrics screen.
one for each hour that data was collected over a 24‐hour period. The
first time period begins one full hour after the library is powered on.
Data collected during the first partial hour following power‐on is
discarded as invalid data.
library is powered off.
Status screen displays.
Monitoring Your Library
User Guide—Spectra T950V Library
153