Check Component Firmware Versions (Optional) - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 14 — Maintaining the Library

Check Component Firmware Versions (Optional)

1. Log into the library as a user with superuser or administrator

2. From the toolbar menu, select Maintenance > Tools. The Maintenance

3. If you want to save the information about the firmware versions to a

4. Select Utilities. The Utilities screen displays.

5. Select Display Firmware Versions. The Utilities screen refreshes to show

This is typically only useful when recommended by Spectra

Logic Technical Support.

Tools screen displays.

Figure 218 The Maintenance Tools screen.

USB device, connect a USB device to a USB port on the LCM or the

operator panel and allow time for the device to mount.

The option to save the information to a USB device is only

displayed if you connect a USB device before you select Utilities

(see Using a USB Device on page 158).

a description of the Display Firmware Versions tool.

Figure 219 Select the Display Firmware Versions utility.

Updating the BlueScale Software and Library Firmware

User Guide—Spectra T950V Library