Spectra Logic Spectra T950V User Manual page 139

Chapter 4 — Configuring the Library
4. Select the Save Library Configuration utility. The screen refreshes to
5. Use the Select the destination drop‐down list to select where you want
Select...
save library
configuration to
USB
mail library
configuration to
[mail recipient]
6. Click Run Utility.
7.
August 2019
show the details for the utility.
Figure 65 The Save Library Configuration utility.
to save the file.
Do not use the check boxes at the top of the screen. They act on
Note:
the Utility Results message, not the configuration file.
To...
Save the library configuration file to the USB device connected to a USB port on
the LCM or front panel. The backup file is stored in a folder called
SavedConfigs\<date-time>, where <date-time> is the time stamp for
when the backup was created. The folder contains multiple configuration files
with the format cnnnnnn.cfg, where n is a number between 0 and 9.
Send the library configuration file as a zip file attached to an email addressed to
a previously configured mail recipient (see Configure Mail Users on page 107).
Note: Do not mail the file to autosupport@spectralogic.com unless Spectra Logic
Technical Support specifically requested the file for troubleshooting.
After a brief delay, the Utility Results screen displays, showing that the
configuration file was either saved or sent.
Confirm that the backup was successful, as described in Verify the
Configuration Backup.
Backing Up the Library Configuration
User Guide—Spectra T950V Library
139