Spectra Logic Spectra T950V User Manual page 341

Chapter 12 — Library Troubleshooting
Start the Tests
1. Log into the library as a user with superuser or administrator
2. If necessary, select General > General Status to display the library's
3. Click Robotics to display the Robotics Status screen.
4. Click Start on the Tools tab to start the Run All Motion Basic Tests.
August 2019
privileges.
General Status screen.
Figure 190 Click Robotics to display the Robotics Status
screen.
Note: After the tests start, you can use the BlueScale interface to
perform other tasks. You only need to return to this screen if you
need to stop the tests.
Figure 191 Start the Run All Motion Basic Tests diagnostic.
User Guide—Spectra T950V Library
Testing the Robotics
341