2. Select Save. The library requires several minutes to store the configuration
information, after which the Shared Library Services screen displays (Figure 5-13
on page 57) showing the new partition.
3. To attach the library to a host, go to Cabling the F-QIP on page 61.
Editing an Existing Partition
To edit an existing library partition, follow these steps.
1. From the toolbar menu, select Configuration > Partitions. The Shared Library
Services screen appears (Figure 5-13).
Figure 5-13 The Shared Library Services screen.
Chapter 5. Partitioning and Connecting to a Host
57