Reset A Rim - Spectra Logic Spectra T950V User Manual

Chapter 12 — Library Troubleshooting

Reset a RIM

Hardware Reset
To perform a hardware reset of a RIM2, insert the tip of a toothpick or other
similar non‐conductive object into the hole in the back panel to press the
Reset button.
Do not use a metallic object to press the reset button. You may inadvertently cause
Caution
an electrical short inside the module.
BlueScale Software Reset
You can also reset the RIM2 through the BlueScale user interface.
1. Determine the BlueScale identifier for the controller you need to reset.
2. Log into the library as a user with superuser or administrator
3. From the toolbar menu, select Maintenance > Tools. The Maintenance
4. Select Utilities. The Utilities screen displays.
5. Click Show Advanced. The Advanced Utilities Confirmation screen
August 2019
RIM2
Figure 187 Location of the RIM2 hardware reset button.
Note: RIMs are shown as F‐QIPs in the BlueScale user interface and are
identified according to their physical location in the library. See
RIM2 Identifiers on page 58 for information about identifiers.
privileges.
Tools screen displays.
displays.
Reset
User Guide—Spectra T950V Library
Resetting Components
338