Enable And Configure Mlm Prescan And Postscan - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 6 — Configuring and Managing Partitions

Enable and Configure MLM PreScan and PostScan

When MLM is enabled, you can configure the partition to use the MLM

PreScan and PostScan features. See Using PreScan on page 266 and Using

PostScan on page 267 for information about these features.

LTO-6, Fibre Channel

LTO-7, Fibre Channel

LTO-8, Fibre Channel

TS1150 Technology, 

Fibre Channel

TS1155 Technology, 

Fibre Channel

TS1160 Technology, 

Fibre Channel

 MLM is enabled by default. If you want to use PreScan and

PostScan but do not see the MLM Media Verification screen,

check to see if MLM is disabled (see Enabling MLM and

Configuring Global Settings on page 255).

 If the partition uses SAS drives, the partition cannot use

FullScan or QuickScan with Global Spares.

 If a partition uses multiple exporting controllers, the

partition cannot use QuickScan.

 If you enable PostScan, the options for SKLM or KMIP

Encryption are not available on the Encryption screen.

Creating a Storage Partition

User Guide—Spectra T950 Library

H990 or later

G9Q0 or later

HB82 or later

47A4 or later

5515 or later