Spectra Logic Spectra T950V User Manual page 93

Chapter 4 — Configuring the Library
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Complete the information in the Add/Update User panel.
For this field...
User
Password
Retype Password
User Type
4. Click Save. The new user name and group assignment is added to the
5. Repeat Step 3 and Step 4 for each additional library user.
August 2019
screen displays.
Figure 39 The Library Users screen.
Note: User names and passwords can contain any combination of the
numbers 0‐9, lower and upper case alphabetic characters (a‐z and
A‐Z), and the at symbol (@), dash (‐), underscore (_), period (.),
forward slash (/), and space characters. There is no limit to the
length but Spectra Logic recommends lengths of less than 2048
characters.
Enter...
The username for the user.
A password for the user and then retype the password to confirm.
Notes:
 For security, the text in the Password and Retype Password fields is shown as
asterisks (*).
 Though highly recommended, passwords are not required for any of the
three user types.
Select the group to which the user belongs.
Note: See Understanding User Groups and Security on page 91 for
descriptions of the user groups and privileges associated with each.
list of users.
Configuring Library Users
User Guide—Spectra T950V Library
93