Spectra Logic Spectra T950V User Manual page 190

Chapter 6 — Configuring and Managing Partitions
3. Click Next. The Save Partition screen displays.
Figure 98 The Save Partition screen for a 
cleaning partition.
4. Review the information on the screen and confirm that all settings are
August 2019
Note: The Save Partition screen on your library may be different from
the ones shown in Figure 99 and Figure 98. The information on
this screen varies depending on the type of partition you
configured and the options you chose.
correct for this partition's configuration.
 If the configuration information is correct, proceed to Step 5.
 If the configuration information is not correct, do one of the
following:
 Click Previous to move backward through the configuration
screens until you reach the settings that need correcting. As you
move backward through the configuration screens, the values
reset to their default values. After you reach the desired screen
and make the necessary changes, click Next to advance through
the screens and re‐enter the necessary information until you
return to the Save Partition screen.
If the screen requiring the correction is toward the
Note:
beginning of the configuration process, it may be easiest
to click Cancel and repeat the entire configuration
process.
 Click Cancel to configure the partition again from the beginning.
Confirming and Saving the Partition Settings
Figure 99 The Save Partition screen for a storage
partition that uses a Global Spare and a cleaning
partition.
User Guide—Spectra T950 Library
190