Spectra Logic Spectra T950V User Manual page 148

Chapter 5 — Operating the Library
Message Severity
Informational
Warning
Error
Fatal Error
3. Read the message(s), and follow any recommended steps.
4. When you are finished reading the messages and complete the
August 2019
The following table describes the severity ranking for messages.
Description
The library is working as intended. An
event occurred that generated
information about an operation or a
system component.
Example: The utility completed
successfully.
The library is working as intended. An
event occurred that may require attention
to keep the library running at 100%.
Example: QuickScan did not complete,
but will retry.
The library operation is impaired and
requires user intervention.
Example: QuickScan did not complete,
and there is a tape stuck in a drive as a
result.
The library experienced an event that
prevents it from continuing operations.
Example: The robot is not responding.
Note: Some error messages are followed by a series of errors that
provide additional information. To understand the sequence of
events, scroll back to view the first error message that was
produced, then read the others for clarification.
If you need assistance, contact Spectra Logic Technical Support (see
Contacting Spectra Logic on page 7).
appropriate actions, you can select and delete individual messages or
you can delete all of the messages.
Monitoring Your Library
Response
No action is required.
If the event was unexpected,
determine the cause of the event
and take remedial steps.
Determine the cause of the error
and take remedial steps.
Examine any additional
information in the message and
take the required remedial steps.
User Guide—Spectra T950V Library
148