Spectra Logic Spectra T950V User Manual page 432

Chapter 15 — Maintaining the Drives
6. The Select Package screen lists the filenames for the firmware update
7. Select the desired drive firmware package from the list.
Source
Spectra Logic
Configured
Package Server
(server name varies)
Memory Card
August 2019
packages.
Figure 244 Select the package for the drive firmware update.
Note: If the package does NOT display in the USB or Package server
section, you may have downloaded the wrong signed/unsigned
package type.
Update packages may be found on the sources described in the table
below. Each drive firmware package contains firmware for only one
drive generation.
Description
Select and download the desired drive firmware package from Spectra Logic's
package server to the memory card in the LCM.
Notes:
 The library must have a connection to the Internet before you can use this option
(see Configure a Package Server on page 130 for instructions for configuring
network settings).
 If directed to do so by Spectra Logic Technical Support, update the IP address
and package directory for the Spectra Logic package server (see Configure a
Package Server on page 130 for instructions for configuring a package server).
Select the desired drive firmware package stored on a previously configured
package server, if you have one available.
Note: This option is only available if you previously configured a package server
(see Configure a Package Server on page 130 for instructions for configuring a
package server).
Select the desired drive firmware package from packages already stored on the
memory card in the LCM.
Updating Drive Firmware
User Guide—Spectra T950V Library
432