Spectra Logic Spectra T950V User Manual page 273

Chapter 9 — Configuring and Using Media Lifecycle Management
Use the following steps to manually start the PostScan process.
1. Enable Media Lifecycle Management if it is not already enabled (see
2. From the toolbar menu, select Maintenance > Media Lifecycle
3. Click Manual PostScan. The MLM Manual PostScan screen displays
4. If the media is in a partition other than the one currently displayed, select
August 2019
Enabling MLM and Configuring Global Settings on page 255).
Management. The Media Lifecycle Management Tools screen displays.
Figure 139 Click Manual PostScan on the MLM Tools screen.
showing the information for the partition that was selected the last time
the screen was viewed.
Figure 140 The MLM PostScan screen.
the desired partition from the Partition drop‐down list, then click Go.
The Source list refreshes to display a list of the cartridges in the
requested partition. The list shows the name of the location (for
example, the slot number) and the barcode label information for the
cartridge in that location.
User Guide—Spectra T950 Library
Using PostScan
273