Override A Poor Cartridge Health Report - Spectra Logic Spectra T950V User Manual

Tape library
Hide thumbs Also See for Spectra T950V:
Table of Contents

Advertisement

Chapter 9 — Configuring and Using Media Lifecycle Management
This option...
Mail Report to
Save to USB
5. Click Save to send the report to the selected destination. Click Previous 

Override a Poor Cartridge Health Report

Under certain circumstances you may need to override the health of an 
MLM‐enabled cartridge that is reported as poor (a red health icon appears 
next to the cartridge barcode). When the cartridge health is poor, a green 
arrow button, that can be used to override the reported health, displays.
During the override process, the library progressively eliminates any 
recent hard errors from the tape health calculation. If the health is still red, 
all hard errors are eliminated from the tape health calculation. The library 
continues to use this adjusted tape health until the cartridge health returns 
to either Good or Average as part of the normal health monitoring. 
Do not reset the cartridge health unless you believe that the reported poor health
Important
is due to drive problems and not the cartridge or you are specifically directed to do
so by Spectra Logic Technical Support.
Use the following steps to reset the health of a single cartridge.
1.
2. Locate the barcode of the cartridge for which you need to reset the 
August 2019
Saves...
The report and attaches it to an email sent to a previously configured mail user. 
Use the drop‐down list to select the recipient for the report file.
Note:
Do not use the default autosupport@spectralogic.com email user. Spectra 
Logic does not save emailed MLM report files unless they are specifically 
requested for troubleshooting.
Save the report to the USB device. 
Note:
The USB option is only available if you connected a USB device to the 
library before you clicked Save Report on the Media Lifecycle Management 
Report screen.
to return to the Media Lifecycle Management Report screen without 
sending the report.
Display the Media Lifecycle Reports screen as described in Generate 
MLM Reports on page 275.
health (see Step 7 on page 280).
Using MLM Reporting
User Guide—Spectra T950 Library
282

Advertisement

Table of Contents
loading

Table of Contents