Spectra Logic Spectra T950V User Manual page 236

Chapter 8 — Using the Cartridge Inventory
5. Use the Destination drop‐down list to select the type of location to
You cannot use the Inventory screen to move a cleaning cartridge in a cleaning
Important
partition to a drive in a storage partition. Instead, use the Clean button on the
Drives screen (see
Partition Type
Storage
August 2019
which you want to move the cartridge, then click Go. The destination
list refreshes to show all of the empty slots in the selected location.
Manually Cleaning a Drive on page
 The available destinations depend on the type of partition
Notes:
you selected.
 The To TAP option is only available when accessing the
BlueScale user interface from the front panel.
Figure 124 Select the Destination for the cartridge.
Available Destinations
 Storage — L ists all of the empty slots in the selected storage partition's storage
pool.
 Entry/Exit — L ists all of the empty slots in the selected partition's entry/exit
pool.
 To TAP — C onfigures a move that transfers the magazine containing the source
slot to the TAP so that you can remove the cartridge from the specified slot.
The magazine is then returned to its original location.
 Drives — L ists the drives in the partition that are currently empty.
 All — L ists all of the empty slots in the partition, regardless of the location.
Selecting a specific destination type instead of using All displays fewer
Note:
items through which you must scroll to locate the desired destination slot.
Moving Cartridges Within a Partition
419).
Available destinations
(storage partition shown)
User Guide—Spectra T950V Library
236