Spectra Logic Spectra T950V User Manual page 143

Chapter 5 — Operating the Library
Use the Front Panel Power Button
1. Press and hold the front panel power button until the button's LED
2. Wait while the library completes its power‐on sequence. After the
3. After initialization is complete, the BlueScale login screen displays (see
Use the Automatic Power-Up After Power Failure Feature
The Automatic Power‐Up After Power Failure feature lets you configure
the library to power on without user intervention after a power failure.
August 2019
illuminates and the LCD operator panel turns on.
Figure 67 Press and hold the front panel power button.
library completes its power‐on sequence, the Library Initialization
screen displays (see Figure 33 on page 83). This screen lists the required
initialization steps and current status of the library's major components
(Robotics, RCM, and LCM). Text boxes provide descriptions about the
currently active tasks.
Log Into the User Interface on page 83).
Note: If the library cannot complete the initialization process, it
generates system messages and enters maintenance mode.
Contact Spectra Logic Technical Support for assistance (see
Contacting Spectra Logic on page 7).
 The Automatic Power‐Up After Power Failure feature must
Notes:
be enabled on the System Setup screen (see Enable
Automatic Power‐Up After Power Failure on page 102).
 The library does not automatically power on if it was powered
off using the front panel power button or the Soft Power feature.
Controlling the Library Power
Power button
User Guide—Spectra T950V Library
143