Determine Whether Cleaning Is Required - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 15 — Maintaining the Drives

Determine Whether Cleaning is Required

Clean the library's drives when any of the following occurs:

 The Drive Details screen indicates that the drive needs cleaning or

Use the following steps to use the Drives screen to determine whether a

drive requires cleaning.

1. Log into the library as a user with superuser or administrator

2. Select Configuration > Drives or Configuration > DLM if MLM is

The drive indicates that it needs cleaning (see Chapter 13 – Drive

Troubleshooting, beginning on page 353) by sending a message to the

storage management software.

displays a C on the SCD for an LTO drive or CLEAN* on the MCD for a

TS11xx technology drive (see Figure 238 on page 417).

In order for the library to monitor drive status, the drive must be

configured in a partition.

enabled. The Drives screen displays.

Figure 237 Click Detail on the Drives screen.

User Guide—Spectra T950V Library

Cleaning a Drive