Spectra Logic Spectra T950V User Manual page 220

Chapter 7 — Importing and Exporting Cartridges
For a...
Storage partition
Cleaning partition
6. Use the Chamber drop‐down list to select the source chamber for the
7. Click Add Move.
Figure 115 Add the move to the Move Queue.
August 2019
Select the direction
Select... To move the magazine from...
TAP > Storage The TAP to the selected chamber in the storage pool.
Storage > TAP The selected chamber in the storage pool to the TAP.
TAP > EE The TAP to the selected chamber in the entry/exit pool.
EE > TAP The selected chamber in the entry/exit pool to the TAP.
TAP > Storage From the TAP to the selected chamber in the cleaning
partition.
Storage > TAP From the selected chamber in the cleaning partition to the
TAP.
TAP > EE For a cleaning partition, the options for moving to or from
the entry/exit pool are not valid.
EE > TAP
move and then click Go to refresh the screen.
 For moves to the TAP from either the entry/exit or storage pool, the
selected chamber is the source for the move. The TeraPack Case
Contents list shows the barcodes of the cartridges in the magazine in
the selected chamber.
 For moves from the TAP to either the entry/exit or storage pool, the
selected chamber is the destination for the move. Use the Chamber
drop‐down list to select an empty chamber in the selected pool.
An entry listing the move you just defined appears in the Move Queue
list.
Using the Advanced Import/Export Options
Select Add Move to add the
defined move to the Move
Queue.
User Guide—Spectra T950V Library
220