Spectra Logic Spectra T950V User Manual page 80

Chapter 3 — Introducing the BlueScale User Interface
Last Refresh Time and Date Shows when the displayed information was
last updated. The library refreshes different screens at different rates,
depending on the type of data displayed. The screen refresh rate can be set
for a specific interval or disabled (see Refresh Rate on page 101). The
displayed information can be refreshed manually by clicking the refresh
display button.
BlueScale Version Shows the BlueScale software version currently being
used by the library.
Network Settings Icon or Library Name Shows the Network Settings icon
or name for the library. If you are managing the library from the touch
screen operator panel, the Network Settings icon displays on the status bar.
Click the icon to go to the Network Settings screen. If you are using the
BlueScale web interface, the library's name is shown instead of the
Network Settings icon.
If you need to view or set the library's IP address or name, see Configure
Network Settings on page 105 and Library Name on page 101, respectively.
Additional Status Bar Icons
The status bar can also include the following additional icons.
Auto Download Icon If one or more package servers are configured to
automatically download firmware packages (see Configure a Package
Server on page 130) and a new package was downloaded, the Auto
Download icon (a wrench in a yellow circle) displays to indicate that an
update package is ready for installation. Click the icon to navigate to the
Package Update screen. See Updating the BlueScale Software and Library
Firmware on page 391 and Updating Drive Firmware on page 422 for
information on installing the update.
Figure 30 The Auto Download icon in the BlueScale status bar.
August 2019
If you are using the BlueScale web interface and you did not set
Note:
the library name, the right‐hand side of the status bar is blank.
Overview of the BlueScale User Interface
Auto Download icon
User Guide—Spectra T950V Library
80