Chapter 6 — Configuring and Managing Partitions
C
ONFIRMING AND
After you finish configuring a partition, confirm and save the partition
settings to complete the creation process.
1. After you complete the configuration screens for the partition as
2. Select whether you want to save the current library configuration.
August 2019
S
AVING THE
Note:
If you want to save the configuration to a USB device, connect
the device to a USB port on the LCM or operator panel (see
Connect a USB Device to the Library on page 159) and allow
time for the device to mount before continuing.
described in the previous sections, click Next. The Save Library
Configuration screen displays.
Figure 97 The Save Library Configuration screen.
Don't Save Library Configuration — A backup of the changed library
configuration is not saved.
Save Library Configuration To (highly recommended) — S aves a
backup of the library configuration to the selected destination.
Using this option is highly recommended to ensure that you can
easily restore the previous library configuration, if necessary.
Select whether to save the library configuration file to a USB device
or to email it to an already‐configured mail recipient (see Configure
Mail Users on page 107).
Do not use the default autosupport@spectralogic.com email
Note:
recipient. Spectra Logic does not save emailed configuration files
unless they are specifically requested for troubleshooting.
Confirming and Saving the Partition Settings
P
S
ARTITION
ETTINGS
User Guide—Spectra T950 Library
189