Upload A Move Queue - Spectra Logic Spectra T950V User Manual

Chapter 7 — Importing and Exporting Cartridges
8. Repeat Step 5 on page 219 through Step 7 on page 220 to add more
9. Continue with Start the Moves on page 224.

Upload a Move Queue

1. Create a media exchange move file listing the offsets for the imports or
2. Log into the library as a superuser or administrator.
3. If you saved the move queue file to a USB device, connect the device to
4. Access the Upload Media Exchange Move List screen.
August 2019
moves to the Move Queue.
 Changing the selected partition clears the move queue.
Notes:
 You can add moves from different directions to the same
move queue.
 If you do not want to perform one or more of the moves in
the queue, do the following:
 Select the move and click Delete to remove it from the
Move Queue list.
 Click Delete All to remove all of the defined moves from
the Move Queue list.
exports you want to initiate. You can create the file using the
mediaExchange.xml?action=prepareImportExportList
command (see the Spectra Tape Libraries XML Command Reference for
more information) or manually. If you are creating the move file
manually, keep the following in mind:
 The file must be an ASCII text file.
 Each line in the file must contain a 1‐based TeraPack offset.
 All chambers indicated by the offsets in a file must be full indicating
an export, or all chambers must be empty indicating an import. You
cannot mix import and export moves in one file.
 If you are using a USB device to upload the file, the file must be
named MediaExchangeMoves.txt and the file must be saved to
the root of the USB device.
one of the USB ports on the LCM or operator panel and allow time for
the device to mount before proceeding.
Using RLC, from the toolbar menu, select General > Import/Export.
The Upload Media Exchange Move List screen displays.
— OR—
Using the Advanced Import/Export Options
User Guide—Spectra T950V Library
221