Configure The Chambers For The Partition - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 6 — Configuring and Managing Partitions

3. Enter a name for the partition and select LTO Clean or TS11x0 Clean as

For this field...

Configure the Chambers for the Partition

1. From the Name and Media Type screen, click Next. The Chambers and

the media type.

Figure 82 Enter a name for the partition and select LTO Clean

or TS11x0 Clean to create a cleaning partition.

Do the following...

Enter a unique, descriptive name to identify the partition as a cleaning

partition. Names can be any length and can include @ ‐ _ /. and the space

character. Partition names over 32 characters causes a scroll bar to display on

some screens and are not recommended.

The default name for a cleaning partition is "Cleaning n", where n is a

number. The partition names are listed alphabetically on many of the BlueScale

screens. If you want the cleaning partitions to be listed after the storage

partitions, precede the name with a "z" or "_".

Select LTO Clean or TS11x0 Clean to create a cleaning partition.

Drives screen displays.

Figure 83 Specify the number of chambers for the cleaning

Creating a Cleaning Partition

User Guide—Spectra T950 Library