Partition; Configure Partitions - Spectra Logic Spectra 12000 User Manual

Remote library controller

Hide thumbs Also See for Spectra 12000:

Table of Contents

Remote Library Controller User Guide

Note: For additional information on Configuration, see the

Spectra 12000 Library User Guide, or the Spectra 64000

Library User Guide.

Partition

The Spectra 12000 library and Spectra 64000 library provide Shared

Library Services™ (SLS). You may partition the physical library so that it

performs and looks like more than one library. Each library can be

dedicated for a specific host or application. You will always need to set

up a partition on a new library, even if you are using only one partition.

To create additional partitions on a library, you will have to un-assign

slots from the default library partition. You must have at least one

unassigned set of 15 slots and one unassigned drive to create a new

partition. To do this use the following steps.

1. From the RLC, select the Configuration toolbar. The Configuration

icons display.

2. Select the Partition icon on the Configuration toolbar.

Table of Contents

Do you have a question about the Spectra 12000 and is the answer not in the manual?

Spectra 64000