Enter Activation Keys - Spectra Logic Spectra T950V User Manual

Chapter 4 — Configuring the Library

Enter Activation Keys

Use the following steps to enter a new BlueScale Software Support key or
the activation key for a new option into the library.
1. Have on hand the activation key for the BlueScale Software Support
2.
August 2019
Enabling BlueScale Software Support, Options, and Upgrades
 Paper copies of the activation keys for the initial BlueScale
Notes:
Software Support license and the options you purchased
with the library are included with the library when shipped.
 The activation keys for the initial BlueScale Software Support
license and the options you purchased with the library are
entered during the installation of the library. Compare the
paper copies of the activation keys with information in the
Option Enablement pane of the System Setup screen and
enter any missing keys as described in this section.
 If you purchase options after the initial library installation,
you are provided an activation key for each option as
described in Add Options on page 99.
 If you receive activation keys by email, it is helpful to use the
BlueScale web interface (RLC) to access the System Setup
screen. You can then cut and paste keys from the email
containing the keys into the System Setup screen instead of
typing them.
license or other option (see Obtain the Option Activation Key on
page 100).
Access the System Setup screen (see Accessing the System Setup Screen
on page 94).
The Option Enablement pane at the top of the screen lists the currently
licensed options.
Figure 42 Enter the keys in the Option Enablement pane of
the System Setup screen.
Enter a new activation key
User Guide—Spectra T950V Library
98