Using Mlm Reporting; Generate Mlm Reports - Spectra Logic Spectra T950V User Manual

Chapter 9 — Configuring and Using Media Lifecycle Management
Use the following steps if you need to temporarily pause the PostScan
process.
1. From the toolbar menu, select Maintenance > Media Lifecycle
2. Click Pause PostScan to pause the PostScan operation for one hour so
U MLM R
SING
After the LTO cartridges in your library are added to the MLM database,
you are ready to make use of this powerful tool to manage, track, and
report all facets of tape usage from creation to retirement.

Generate MLM Reports

1. Log into the library.
2. From the toolbar menu, select General > Media Lifecycle Management.
August 2019
Management. The Media Lifecycle Management Tools screen displays.
The Pause PostScan button is only present if the PostScan
Note:
process is running.
Figure 141 Click Pause PostScan on the MLM Tools screen
to interrupt the PostScan process.
that you can use the Global Spare or perform other library operations.
After an hour passes, the library restarts the PostScan operation on the
tape that was being verified at the time of the interruption, provided
the PostScan prerequisites listed on page 268 are met.
EPORTING
The Media Lifecycle Management Report screen displays.
You can also click on the Filled Capacity bar graph on the
Note:
General Status screen (Figure 129 on page 254).

Using MLM Reporting

User Guide—Spectra T950 Library
275