Modify An Existing User; Delete An Existing User; Ccessing The; System - Spectra Logic Spectra T950V User Manual

Chapter 4 — Configuring the Library

Modify an Existing User

If you change the passwords for the default users, make sure that you keep a record
Important
of the new passwords. The passwords cannot be reset if you forget them.
Use the following steps to change settings for an existing user.
1. Log into the library as a user with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Find the user's name, then click Edit next to the name.
4. Change the user's name, password, group, or any combination of these
5. Click Save to save your changes.

Delete an Existing User

Use the following steps to delete an existing user.
If you delete the default users, make sure that you keep a record of at least one
Important
superuser name and password.
1. Log into the library as a user with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Locate the name of the user to delete, then click Delete next to that
A

CCESSING THE

Overview All of the settings for the library's general configuration options
are accessed through the System Setup screen. The screen is divided into
two panes. You may need to use the scroll bar to see the entire screen.
August 2019
screen displays (see Figure 39 on page 93), showing a list of library user
names.
as required.
Note: The library requires there to be a minimum of one user assigned
to the superuser group. You cannot delete the last member of the
superuser group.
screen displays (see Figure 39 on page 93), showing a list of library user
names.
user's name.
When the screen refreshes, the user list no longer includes the user
name you just deleted.
S S
YSTEM ETUP
Accessing the System Setup Screen
S
CREEN
User Guide—Spectra T950V Library
94