Universal Serial Bus (Usb) Support; Ndmp Support; Tape Drive And Media Specifications; Lto Tape Drive Specifications - Spectra Logic Spectra T950V User Manual

Appendix C — Specifications

Universal Serial Bus (USB) Support

Spectra Logic supports using the USB ports on the library operator panel,
the LCM, and the RCM for the following:
 Keyboards
 Pointer devices (for example, a computer mouse)
 External Drives (HD, CD, DVD, and Flash) with a USB interface
Spectra Logic does not support using the USB ports for the following:
 Cameras
 Multimedia devices (for example, MP3 players)
Important
The library only recognizes FAT-formatted, not NTFS-formatted, USB devices.

NDMP Support

Spectra Logic tape libraries are compatible with local, remote, and three‐way
NDMP (Network Data Management Protocol) topologies, where the tape
library is connected to the NDMP data mover host over Fibre Channel.
T D
APE RIVE AND
This section provides the basic specifications for the tape drives and media
supported by the library.
LTO Tape Drive Specifications
This section provides specifications for the LTO drives supported by the
library. See Tape Media Specifications on page 492 for information about
the media used in the library.
August 2019
M S
EDIA PECIFICATIONS
Note: The specifications in this section are provided for convenience
only. Refer to the tape drive documentation for the most current
specifications (see LTO Ultrium Tape Drives on page 20 and
TS11xx Technology Drives on page 20).
Note: LTO drives and media are also referred to as Ultrium or LTO
Ultrium drives and media.

Tape Drive and Media Specifications

User Guide—Spectra T950V Library
488