Chapter 4 — Configuring the Library
5. Click the correct button to add, delete, or edit a package server.
Task
Procedure
Add a Package
1. Click
Server
Figure 60 The Configure Package Server screen.
2. Fill in the requested information:
Required
Optional
3. Select or clear Automatically Download Latest Package.
If selected, the library checks the package server once a week for a library
If cleared, you must check for updates manually.
4. Click Save. The screen refreshes and adds the new server to the list of available
package servers.
Note:
directory where the BlueScale packages are stored.
Edit a Package
1. Click Edit next to the server's name and details. The Configure Package Server
Server
screen displays, with the appropriate fields completed.
2. Edit the server information as necessary.
3. Click Save.
Delete a
Click Delete next to the server's name and details.
Package
Server
August 2019
Add
. The Configure Package Server screen displays.
— N ame and IP Address. If no Proxy is set, the IP Address can be an
IPv4 or an IPv6 address. If a Proxy is set, the IP Address must use IPv4.
—
P ort, Proxy, and Directory fields use default values if nothing is
entered. The Proxy, if set, must use IPv4.
update package and drive firmware package newer than what the library is
currently running. If a new package is available, the library downloads it,
generates a system message, and displays an icon on the status bar to indicate
the update availability.
If you specify the directory, make sure you include the full path to the
Important:
There is no confirmation requested when you delete a package
server. After you click Delete, the server is immediately removed from the list of
available package servers. However, the packages on the server are not deleted.
Configuring Optional Library Settings
User Guide—Spectra T950V Library
132