Spectra Logic Spectra T950V User Manual page 347

Chapter 12 — Library Troubleshooting
Update the Library Inventory
When you restore the configuration, any magazines that were imported
into a partition after the configuration backup file you used was generated
are not recognized as belonging to the partition. Instead, the library
notifies you that there are unused magazines in the free pool.
Use the following instructions to update the library inventory to reflect the
correct number of magazines assigned to the partition.
1. Log in as a user with superuser or administrator privileges.
2. From the toolbar menu, select Configuration > Partitions. The Shared
3. Click Edit for the partition to which the unassigned magazines should
4. Click Next to advance through the partition configuration screens until
August 2019
 If you made configuration changes after the creation date of the
automatically generated configuration backup file you used, you
need to use the options in the System Setup screen to repeat those
changes after the restore is complete.
 If you entered activation keys after the creation date of the
automatically generated configuration backup file you used, you
need to use the Option Enablement pane of the System
Configuration screen to re‐enter those keys (see Enter Activation
Keys on page 98).
Library Services screen displays.
belong.
you reach the Chambers and Drives screen.
Figure 195 The Chambers and Drives screen.
Restoring the Library Configuration
User Guide—Spectra T950V Library
347