Chapter 4 — Configuring the Library
10.
Configure a Package Server
Overview Configuring a package server is optional. A local package
server can be used to store BlueScale packages downloaded from Spectra
Logic for updating the BlueScale software or library component firmware.
Update packages can also be downloaded directly from the Spectra Logic
website to the memory card in the library's LCM or to a USB device.
User Privilege Requirements Only a user with superuser or administrator
privileges can configure a package server.
Configure a Package Server Use the following steps to configure, modify,
or delete a local package server.
1. Identify the server or servers you want to use for storing BlueScale
2. Log into the library as a user with superuser or administrator privileges.
3. Select Maintenance > Package Update. The Package Update screen
August 2019
See Changing the Library Barcode Reporting Configuration on
page 126 to configure the barcode reporting to match your barcodes.
Note:
For additional information about BlueScale packages and how to
use them, see Updating the BlueScale Software and Library
Firmware on page 391.
packages. Make sure that these servers can access the Internet and that
they are on the same network as the libraries you want to update.
Note:
Both Microsoft Internet Information Services (IIS) and the Unix‐
based Apache server work as package servers.
displays.
Figure 58 The Package Update screen.
Configuring Optional Library Settings
User Guide—Spectra T950V Library
130