Spectra Logic Spectra T950V User Manual page 173

Chapter 6 — Configuring and Managing Partitions
3. Enter a name for the storage partition and select the media type.
For this field...
Name
Media Type
August 2019
Note: If the storage partition media type is grayed out, then all licensed
chambers are assigned to partitions. Edit an existing partition to
free up chambers or purchase a Capacity on Demand key to
increase the number of available storage chambers.
Figure 86 Enter a name for the partition and select the media
type.
Do the following...
Enter a unique, descriptive name to identify the partition. Names can be any
length and can include @ ‐ _ /. and the space character. Partition names over 32
characters causes a scroll bar to display on some screens and are not
recommended.
The default name for a storage partition is "Partition n", where n is a number.
Note: In many of the BlueScale screens, the partitions are listed alphabetically.
Keep this in mind when naming your partitions.
Select LTO to create a storage partition that uses LTO drives and media. Select
TS11x0 to create a storage partition that uses TS11xx technology drives and
media.
Creating a Storage Partition
User Guide—Spectra T950 Library
173