Pause The Postscan Process - Spectra Logic Spectra T950V User Manual

Chapter 9 — Configuring and Using Media Lifecycle Management
5. Select the cartridge that you want to check for media errors. You can
To select a cartridge
using the...
Source list
Slot number
Barcode label
information
6. Click Add to add the selected cartridge to the Tape List.
7. Repeat Step 4 though Step 6 to add additional tapes to the Tape List.
8. Click Submit to add the cartridges in the Tape List to the PostScan

Pause the PostScan Process

If you need to perform any of the operations listed in Background
Operations on page 253 or if you need to reset the library, you can pause
the PostScan process. The library returns any cartridges currently being
scanned to their original locations.
Important
Pausing PostScan affects all partitions that are configured to use PostScan.
August 2019
select the cartridge either from the Source list, by entering its barcode,
or by entering the slot number where it is located.
Follow these steps...
Scroll through the list of available media and select the desired cartridge.
1. Enter the slot number for the cartridge you want in the View Source Slot field.
2. Click Go. The Source list refreshes to show the requested cartridge
highlighted at the top of the list.
3. Click the cartridge to select it.
1. Enter the barcode label information for the cartridge you want to locate in
the Find by Barcode field.
2. Click Find. The Source list refreshes to show the requested cartridge
highlighted at the top of the list.
3. Click the cartridge to select it.
Important: Only the slots below the top one displayed in the list are searched.
Scroll to the top of the source list before clicking Find. The search starts at the
second visible slot.
If you want to remove one or more cartridges from the Tape List:
Note:
 Select the cartridge and click Delete to remove it from the list.
 Click Delete All to remove all of the cartridges from the list.
queue.
User Guide—Spectra T950 Library
Using PostScan
274