Spectra Logic Spectra T950V User Manual page 135

Chapter 4 — Configuring the Library
Administrators can follow the instructions in the email they receive to
import identifying information for every barcode labeled cartridge and its
off‐site location into the storage management software. Because the
cartridge barcodes are associated with the barcode of the magazine
containing the cartridges, groups of cartridges can be located using a single
barcode. Refer to the documentation that accompanied your software for
information about using the vltcontainers command to manage the
off‐site magazines and cartridges.
User Privilege Requirements Only a user with superuser or administrator
privileges can configure Rotation Manager. See Understanding User
Groups and Security on page 91 for information about the three types of
user groups and what types of privileges each has.
Configure Rotation Manager Use the following steps to configure the
Rotation Manager.
1. Log into the library as a user with superuser or administrator
2. If necessary, obtain the activation key for Rotation Manager and enable
3. From the toolbar menu, select General > Import Export > Rotation
4. Symantec NetBackup is the only vendor supported by Rotation Manager
August 2019
Before you can use Rotation Manager, you must enter the
Note:
activation key to enable it as described in Enter Activation Keys
on page 98.
privileges.
it as described in Enabling BlueScale Software Support, Options, and
Upgrades on page 96.
Manager. The Rotation Manager Configuration screen displays.
Figure 63 The Rotation Manager Configuration screen.
and is selected automatically.
Note: NetBackup Vault Manager was acquired by Symantec and
continues to be supported by Rotation Manager even though it is
not listed on the Rotation Manager Configuration screen.
Configuring Optional Library Settings
User Guide—Spectra T950V Library
135