Spectra Logic Spectra T950V User Manual page 242

Chapter 8 — Using the Cartridge Inventory
Upload and Process the Move Queue File After you finish creating the
move queue file, use the following steps to upload and process the file.
1. Log into the library as a user with superuser or administrative
2. If you saved the move queue file to a USB device, connect the device to
The option to upload the move queue file from a USB device cannot be selected if
Important
the USB device is not connected and mounted before you click Advanced on the
inventory screen.
3. From the library user interface, select General > Inventory. The
4. If you want to upload the move queue to a storage partition other than
5. Click Advanced to display the options for uploading and processing the
6. On the Advanced Inventory screen, select the Upload Moves tab.
August 2019
privileges.
one of the USB ports on the LCM or operator panel and allow time for
the device to mount before proceeding (see Connect a USB Device to
the Library on page 159).
Inventory screen displays showing the information for the last partition
that was viewed on either the Inventory screen or the Import/Export
TeraPack Magazines screen.
the one currently displayed, select the desired partition from the
Partition drop‐down list, then click Go.
Using a move queue file is only supported for storage partitions.
Note:
move queue file (see Figure 120 on page 230).
Figure 127 Select the upload options for the move queue
file.
Moving Cartridges Within a Partition
User Guide—Spectra T950V Library
242