Table of Contents
Advertisement
Chapter 9 — Configuring and Using Media Lifecycle Management
Discover Cartridges Manually
1. Make sure that Media Lifecycle Management is enabled before you
2. From the toolbar menu, select Maintenance > Media Lifecycle
3. Click Discover Media to start the manual discovery process.
4. Select the partition containing the cartridges you want to add to the
August 2019
start the discovery process (see Enabling MLM and Configuring Global
Settings on page 255).
Management. The Media Lifecycle Management Tools screen displays.
If all of the media in the library was previously discovered, the
Note:
Discover Media button is grayed out. You do not need to perform
a manual media discovery.
Figure 134 Click Discover Media on the MLM Tools screen to
begin configuring a manual media discovery process.
MLM database, then click Next.
Figure 135 Select the partition containing the cartridges
you want to add to the MLM database.
Using Media Lifecycle Management
User Guide—Spectra T950 Library
264
Advertisement
Table of Contents
Troubleshooting
