Spectra Logic Spectra T950V User Manual page 333

Chapter 12 — Library Troubleshooting
User Privilege Requirements Only a user with superuser or administrator
privileges can capture traces.
Procedure Use the following steps to capture the desired trace.
1. Log into the library as a user with superuser or administrator privileges.
2. From the toolbar menu, select Maintenance > Tools to display the
3. If you want to save the traces to a USB device, connect the USB device
4. Select Traces. The System Traces screen displays with the trace options
5. Select the type of trace that Spectra Logic Technical Support requested.
August 2019
Maintenance Tools screen.
Figure 183 The Maintenance Tools screen.
to the LCM or the operator panel and allow time for the device to
mount.
that were selected the last time the screen was viewed.
Figure 184 Select the traces you want to capture on the
System Traces screen (Error Log trace results shown).
 LCM Trace — C aptures a trace relating to a single aspect of operations
related to the LCM.
 Component Trace — C aptures a trace relating to the logical library or
a single aspect of operations related to the robotics or a controller
(RIM).
Note: RIMs in the library are listed as F‐QIPs.
User Guide—Spectra T950V Library
Capturing Traces
333