Chapter 3 — Introducing the BlueScale User Interface
After the library completes initialization of configured components, the
Library Controller: Login screen displays on the library operator panel.
This Login screen also displays when you access the library remotely using
the BlueScale web interface (RLC), as well as when you switch users or
when the library automatically logs out the current user if auto‐logout is
enabled.
If there is no interaction with the operator panel within 30 seconds after the
Login screen displays, the Login screen is replaced by the pre‐login
General Status screen. This General Status screen provides at‐a‐glance
status for the library and its components without requiring you to log into
the library. You can view the status of the entire library or a specific
partition.
Figure 35 Log in from the pre-login General Status screen.
August 2019
Figure 34 The Library Controller: Login screen.
Note:
The pre‐login General Status screen does not display when you
access the library remotely through the BlueScale web interface.
Using the BlueScale User Interface
Touch to display the Library
Controller: Login screen
User Guide—Spectra T950V Library
84