Spectra Logic Spectra T950V User Manual page 334

Chapter 12 — Library Troubleshooting
6. Use the check boxes to select any combination of the options for saving
Option
Mail results to
Save to USB
Display Full LCM
Trace
August 2019
the generated trace.
Description
Sends the trace report to a previously configured mail recipient. Use the drop‐
down list to select the recipient for the report file.
To send the email with the attached trace file to someone who is not already
listed as a library user, you must first configure that person as an email
recipient (see Configure Mail Users on page 107).
Note: Do not use the default autosupport@spectralogic.com email recipient.
Spectra Logic does not save emailed traces unless they are specifically
requested for troubleshooting.
Saves the report to the USB device. The results can then be viewed from any
device that can read from USB.
Note: This option is only available if you inserted a USB device in Step 3 on
page 333.
Opens a new screen that shows the entire trace.
The Display Full LCM Trace check box only applies to selections made in
Note:
the LCM Trace list, not selections made in the Component Trace list. If Display Full
LCM Trace is selected when you are generating a component trace, the selection
is ignored.
User Guide—Spectra T950V Library
Capturing Traces
334