Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1292

Service Tool
List of Special Tools
When servicing this machine, the special tools shown below are required besides the standard tools.
Tool name
Digital multi-meter
CA-1 Test Sheet
Reference: Rank
A: Tool each service engineers should have 1 pc per engineer
B: Tool a group of approx. 5 engineers should have 1 pc per group
Solvent/Oil List
Name
Alcohol Cleaning
MOLYKOTE EM-50L Apply to gear
Super Lube Grease Worm Gear
Lubricant (FLOIL G-337) Scanner Rail
Conductive grease Applied to the Drum Heater sliding area and the ends of the Secondary Transfer Outer Roller, Electrical continuity
of the high voltage contact point
Applied to the ends of the Secondary Transfer Inner Roller
Tospearl 240 Lubrication of the ITB Cleaning Blade
SE1107 Applied to the gear of the Fixing Unit or the Fixing Pressure Roller Shaft
MOLYKOTE HP-300 Applied to the Fixing Pressure Roller Shaft
HANARL UD-321
Tool No.
FY9-2002
FY9-9030
Purpose of use
Rank Configuration
A
A
Parts number
- • Never put it close to fire
• Local procurement
HY9-0007 • Dow Corning-made
FY9-6005 • Chemical synthesis oil
• 85 g
FY9-6030 • Synthetic hydrocarbon oil
• 50 cc
FY9-6008 • Barrierta IMI (10 g)
FY9-6006 • Super Lube Grease (7 g)
FY9-6007
FY9-6036 • 10 g
CK-8012
FY9-6037 • Quick-drying grease (Since it is quick-drying and transparent, caution is required to identify
1278
Use/Remarks
Used for supplementary electricity check of the electricity
check
For image adjustment/check
Remarks
the area where it is applied.)
Service Tool